Pureflow Bio

Pureflow Bio · Made in India

Pro CRDF-50 Combi Drum Filter

Pro Series pump-fed combi filtration for fish-farm and hatchery treatment circuits, with a 50 m³/h catalogue maximum-flow listing. The catalogue specifies a 75-micron SS 316 drum screen, automatic level-sensor washing and a 80 W × 3 UV lamp arrangement.

Download the Pro Series CRDF catalogue (PDF) ↗
Pro Series CRDF illustration with drum and biological chambers
Shared series illustration from the supplied catalogue.
50 m³/hCatalogue maximum flow
75 micronsSS 316 drum screen
3 × 80 WCatalogue UV lamp listing
3370 mmOverall catalogue length

Pro CRDF-50 specifications

Pro CRDF-50 technical specifications
ModelPro CRDF-50
Series and feed arrangementPro Series CRDF
Overall length3370 mm
Overall width900 mm
Overall height1270 mm
Listed water volume50 m³
Catalogue maximum flow50 m³/h
Water inlet90 mm × 2
Water outlet110 mm × 2
UV lamp power and quantity80 W × 3
Combined UV lamp nameplate power240 W, calculated from the lamp listing
ScreenSS 316 grade, 75-micron mesh
Automatic cleaningLevel-sensor trigger and high-pressure washer nozzles
Drive componentWear-resistant PP gear

Catalogue maximum flow and listed water volume are comparison values. Final selection also depends on solids and feed loading, biological media, aeration and available hydraulic head. UV listings show watts per lamp × quantity; they are not the total electrical load or a validated disinfection dose.

Where Pro CRDF-50 fits

Application

A dedicated pump-fed series for projects comparing the Pro footprint and three-lamp UV arrangement with the standard pump-fed range. The Pro name is not a substitute for a verified hydraulic or UV duty.

Hydraulic fit

Pro CRDF-50 is listed at 50 m³/h with 2 inlet connection(s) of 90 mm and 2 outlet connection(s) of 110 mm. Match the pipework and actual filter flow to the installation drawing.

Biological duty

The catalogue lists 50 m³ water volume. Media type, fill volume, aeration and daily feeding must be assessed separately; water volume alone does not establish biological capacity.

Plan the installation

Allow for the Pro model’s own footprint and connection sizes rather than using the corresponding standard CRDF dimensions. Review feed-pump duty, return levels, drain routing, service access and electrical requirements before finalising the installation.

How the treatment stages work

A pump feeds the combined treatment unit. Drum screening and automatic washing handle retained solids, while the biological chambers provide the agreed media arrangement. The catalogue lists three UV lamps for each Pro model; treatment performance also depends on flow, water UV transmittance and the selected lamp system.

Screen

The 75-micron SS 316 screen separates particles it can retain from the water stream.

Wash

A level sensor triggers automatic washing; high-pressure nozzles direct retained material to the waste route.

Biological stage

The chamber arrangement supports the specified media and aeration system. Monitor water quality as the biological stage matures.

Compare your options

Compare Pro CRDF-50 with nearby Pro Series CRDF models
ModelL × W × H (mm)Listed water volume (m³)Max. flow (m³/h)Inlet (mm × qty)Outlet (mm × qty)UV lamp listing
Pro CRDF-352600 × 750 × 1210353575 × 290 × 260 W × 3
Pro CRDF-503370 × 900 × 1270505090 × 2110 × 280 W × 3
Pro CRDF-1004300 × 1050 × 145010010090 × 2110 × 3100 W × 3

Pro versus pump-fed CRDF at the same listed flow

Same-flow comparison
ModelL × W × H (mm)Listed water volume (m³)Max. flow (m³/h)Inlet (mm × qty)Outlet (mm × qty)UV lamp listing
CRDF-503000 × 850 × 1200505090 × 2110 × 260 W × 3
Pro CRDF-503370 × 900 × 1270505090 × 2110 × 280 W × 3

The Pro 50 model is 3370 mm long, compared with 3000 mm for CRDF-50. Its UV listing is 80 W × 3, compared with 60 W × 3. Compare the complete footprint, pipework and treatment duty before choosing between them.

Service access and maintenance

Inspect the drum screen, spray nozzles, level sensor, PP drive gear and waste drain. Check the biological chambers and aeration arrangement according to the operating instructions. Isolate electrical and UV equipment before servicing; follow the supplied lamp and sleeve maintenance schedule.

Pro CRDF-50 questions answered

What is the maximum flow listed for Pro CRDF-50?

The catalogue maximum-flow listing is 50 m³/h. Final operating duty must account for the 75-micron screen, solids loading and hydraulic conditions.

What are the dimensions of Pro CRDF-50?

The catalogue lists 3370 mm length, 900 mm width and 1270 mm height. Allow additional space for service access and connected pipework.

What UV lamps are listed for Pro CRDF-50?

The listing is 3 lamp(s) at 80 W each. This is a lamp-power listing, not a validated UV dose or the total electrical consumption of the filter.

Does the combi filter replace biological design?

No. The biological media, aeration, feed loading and commissioning plan must suit the application. The catalogue water-volume figure is not a guaranteed ammonia-removal capacity.

How do I request a quotation?

Send Pureflow Bio the Pro CRDF-50 model name, project location, actual filter flow, daily feed and installation layout. The quotation confirms the supplied configuration and scope.

Request a Pro CRDF-50 quotation

Share your filter flow, application, daily feed and project location. Our team will review the equipment and installation requirements with you.

    Fields marked * are required.






    Your enquiry is sent securely to our team so we can respond to your requirements. Please do not include passwords, payment details or other sensitive information.

    Scroll to Top